Over time, your favorite jewelry inevitably fades, loses its original luster and becomes covered with a dark coating. This occurs due to contact with skin, cosmetics and moisture in the air. To bring back the shine rings and earrings, you don’t have to take them to the workshop or buy expensive products. Simple home methods cope with the task no worse than professional cleaning, if you know the correct approach to each material.
The safest and most universal way is to use soap solution. It is suitable for most alloys and plastic elements. You need to dissolve a little liquid soap or mild shampoo in warm water. The products are immersed in this liquid for several minutes to soak the dirt. Then the jewelry is carefully wiped soft sponge or a microfiber cloth. It is important to avoid hard brushes, which can leave micro-scratches on the metal surface.
To remove more stubborn stains, they are often used. toothpaste. However, caution is required here: the paste must be free of abrasive particles and whitening effect. Apply the product to a soft cloth or cotton swab and gently polish the darkened areas. After the procedure, the remaining paste must be thoroughly rinsed with water, since when it dries in the recesses, it can create a white coating that will be difficult to remove.
If the jewelry imitates gold or silver, it gives a good result ammonia. A few drops are added to water, and the resulting solution is wiped onto the surface. This method perfectly removes grease and returns bright shine to products. But it is worth remembering that ammonia is aggressive towards some coatings and artificial pearls, so before cleaning it is better to test on an inconspicuous area.
Decorations with crystals and rhinestones. They should not be soaked, as water may dissolve the glue that holds the stones in place. For such products, only dry or semi-wet cleaning is suitable. It is best to use special optical or glass wipes that remove fingerprints and dust without leaving streaks. The shine of the stones is instantly restored after light polishing.
The final stage of any cleaning is thorough drying. Moisture is the main enemy of base metals, causing corrosion and darkening. After washing, each item should be blotted with a paper towel and left to dry completely in the open air. It is best to store jewelry in closed boxes or bags to minimize contact with moisture and light. Regular care allows you to maintain the attractive appearance of your accessories for many years.
About the Author
