It seems that you have just perfectly polished the surface, but within a day dust, stains and small drops are again visible on it. This problem is familiar to many, and most often it’s not the quality of cleaning, but the hidden factorswhich attract dirt like a magnet. To break this vicious cycle, the root causes of rapid pollution must be addressed.
Invisible film from detergents
The most common mistake is using products that are not intended for mirrors. Many universal sprays or solutions with the addition of soap create on the surface thin sticky film. Visually it is difficult to notice immediately after drying, but it works like glue for micro dust particles.
-
Avoid dishwashing detergents or all-purpose gels.
-
Use alcohol-containing compounds that evaporate completely.
-
Avoid products with glycerin if the bathroom has high humidity.
The influence of aerosols and cosmetics
In the bathroom or hallway, the mirror often becomes a victim of cosmetic procedures. Small particles hairspraydeodorants, perfumes and dry shampoos settle on the glass even if you stand a couple of meters away from it. These substances contain oils and polymers that instantly harden on the surface.
It is impossible to remove such deposits with ordinary water – it only smears it, creating a “fog” effect. To combat this problem, you need to regularly wipe the surface. microfiber immediately after using aerosols, without waiting for the layer to harden.
Unsuitable cleaning materials
The fabric you use may be the main source of the problem. Terry towels, low-quality paper napkins or old rags are left on the glass microscopic villi and paper dust. These particles create static electricity, which literally attracts new dust from the air within a few hours of cleaning.
-
Use special glass wipes with a smooth texture.
-
Synthetic suede perfectly polishes and removes static.
-
Never use fabric softener when washing cleaning cloths as it reduces absorbency.
Ventilation and humidity problem
In the bathroom, mirrors get dirty the fastest due to… condensate. When hot steam settles on cold glass and then dries, traces of droplets containing hardness salts from tap water remain. In addition, a damp surface more actively captures dust flying in the air.
The solution lies in improving air circulation. High-quality ventilation allows moisture to evaporate faster, without having time to mix with dust. It also helps to treat glass with hydrophobic agents (for example, car “anti-rain”), which cause water to roll off without leaving marks.
To maintain cleanliness for a long time, it is enough to review the set of household chemicals and replace fluffy fabrics with high-quality microfiber, which will allow the mirror surface to remain transparent throughout the week.
About the Author
