The desire to speed up the defrosting of the freezer often pushes you to use improvised means. The most dangerous tool in this situation is a kitchen tool. knifewhich many try to pry and break off pieces of ice. This seems like it will save time, but in practice, such haste often leads to fatal equipment failure or injury.
The main threat lies in the design of modern refrigerators. The walls of the freezer are not just plastic or metal, there are channels behind them evaporatorthrough which the refrigerant circulates. The aluminum in these areas is quite soft and thin. One awkward movement with a sharp object can pierce the canal. The result is a leak freonand the compressor stops cooling the chamber, running idle.
Repairing such a breakdown is difficult and expensive. In some cases, if the damage is in the foamed part of the housing, it is almost impossible to restore the tightness of the system. An attempt to save half an hour of time results in the need to buy new technology. Even a microscopic crack, invisible to the eye, can release gas in a few hours.
The second reason to give up a knife is the high risk injuries. Ice has a hard and slippery structure. When you try to apply force, the blade often slips. In the narrow space of the freezer, this can lead to deep cuts on your hands or damage to your face from flying ice shards. Safety at home is more important than speed of cleaning.
In addition, mechanical impact leaves deep scratches on the inner coating of the camera. Damaged plastic becomes an ideal environment for the growth of bacteria and the appearance of an unpleasant odor, which is then difficult to remove. The smooth surface is specially designed for easy cleaning, and damage to its integrity complicates future maintenance of the device.
To safely speed up the process, it is better to use containers with hot waterplaced inside on a stand, or a special plastic scraper, which is often included. Warm air and natural melting ensure the integrity of the cooling system. A patient approach to defrosting is always cheaper than urgently calling a technician.
About the Author
