An unpleasant odor from clean laundry often indicates that the equipment itself needs help. Over time they accumulate inside powder residuelint and moisture, creating an ideal environment for mold. You can correct the situation using improvised means without calling a specialist.
Check the rubber cuff
This is where the source is most often hidden musty smell. Water stagnates in the folds of the seal and bacteria multiply. To clean, take a cloth soaked in the solution. vinegar or chlorhexidine, and thoroughly wipe the rubber inside and out. Pay special attention to hidden cavities where dirt often accumulates.
Clean the drain filter
At the bottom of the hull there is a hatch that hides drain filter. Coins, buttons, hair and wool collect there, which begin to rot and emit a stench. Place the water container, unscrew the lid and remove all debris. Rinse the part under running water using dishwashing detergents.
Run a dry wash
To rinse the tank and heating element from scale and mucus, use high temperature. Pour 100 grams into the powder tray citric acid or pour a glass of table vinegar. Select the highest temperature setting (usually 90-95 degrees) and turn on the machine without laundry. This will kill fungus and will eliminate the cause of odor from the most inaccessible places.
Ventilate the drum
The main mistake that leads to dampness is closing the door immediately after washing. The moisture does not have time to evaporate, and a greenhouse effect. Always leave the hatch and powder tray ajar for at least a couple of hours to allow the equipment to dry naturally.
Regular care will extend the life of the device and keep your items fresh.
About the Author
